Air Conditioning Instructions

Air Conditioning Instructions:

AC system is designed for Island living and energy efficiency. Due to high humidity in the air, please allow extra time for rooms to cool.

Locations:
There are three Master slaves located in the Master Bedroom, Kitchen and Guest house. The Master Bedroom wall thermostat also controls Guest Bedroom 1 (Zone 2) and Guest Bedroom 2 (Zone 3).

For proper cooling, please keep AC set to the following parameters:
⦁ Fan must be set to “Automatic” for best efficiency and cooling (see photo below)
⦁ Mode must be set to “COOL”.
⦁ Use right side white buttons to select temperature. Please do not set the temperature below 72F. AC functioning is compromised and might stop working if temperature is set below 72F.
⦁ AC should be set to be on “HOLD” at all times in order to keep area cool.
⦁ To control Guest Bedrooms 1 and 2 from Master Bedroom thermostat, press “NEXT ZONE” - Guest Bedroom 1 is controlled under Zone 2 and Guest Bedroom 2 is controlled under Zone 3.
If you would like to enjoy the nice Hawaiian breeze, please turn OFF the equipment by pushing “MODE” button until the display shows “OFF”.

1- Kitchen; Master; Ohana Thermostat:

2- Guest Bedroom Thermostat:

⦁ The Master Bedroom wall thermostat also controls Guest Bedroom 1 (Zone 2) and Guest Bedroom 2 (Zone 3).

⦁ To control Guest Bedrooms 1 and 2 from Master Bedroom thermostat, press “NEXT ZONE” - Guest Bedroom 1 is controlled under Zone 2 and Guest Bedroom 2 is controlled under Zone 3.

⦁ Guest Bedroom Thermostat AC should be set to be on “HOLD” at all times in order to keep area cool.

⦁ Use right side white buttons to select temperature. Please do not set the temperature below 72F. AC functioning is compromised and might stop working if temperature is set below 72F.